use crate::config::PreprocessorConfig;
use crate::error::{Error, Result};
use hound::{WavReader, WavSpec};
use ndarray::Array2;
use std::f32::consts::PI;
use std::path::Path;

pub fn load_audio<P: AsRef<Path>>(path: P) -> Result<(Vec<f32>, WavSpec)> {
    let mut reader = WavReader::open(path)?;
    let spec = reader.spec();

    let samples: Vec<f32> = match spec.sample_format {
        hound::SampleFormat::Float => reader
            .samples::<f32>()
            .collect::<std::result::Result<Vec<_>, _>>()
            .map_err(|e| Error::Audio(format!("Failed to read float samples: {e}")))?,
        hound::SampleFormat::Int => reader
            .samples::<i16>()
            .map(|s| s.map(|s| s as f32 / 32768.0))
            .collect::<std::result::Result<Vec<_>, _>>()
            .map_err(|e| Error::Audio(format!("Failed to read int samples: {e}")))?,
    };

    Ok((samples, spec))
}

pub fn apply_preemphasis(audio: &[f32], coef: f32) -> Vec<f32> {
    let mut result = Vec::with_capacity(audio.len());
    result.push(audio[0]);

    for i in 1..audio.len() {
        result.push(audio[i] - coef * audio[i - 1]);
    }

    result
}

fn hann_window(window_length: usize) -> Vec<f32> {
    (0..window_length)
        .map(|i| 0.5 - 0.5 * ((2.0 * PI * i as f32) / (window_length as f32 - 1.0)).cos())
        .collect()
}

// We use proper FFT here instead of naive DFT because the model was trained
// on correctly computed spectrograms. Naive DFT produces wrong frequency bins
// and the model outputs all blank tokens. RustFFT gives us O(n log n) performance
// and numerically correct results that match what the model expects.
pub fn stft(audio: &[f32], n_fft: usize, hop_length: usize, win_length: usize) -> Array2<f32> {
    use rustfft::{num_complex::Complex, FftPlanner};

    let window = hann_window(win_length);
    let num_frames = (audio.len() - win_length) / hop_length + 1;
    let freq_bins = n_fft / 2 + 1;
    let mut spectrogram = Array2::<f32>::zeros((freq_bins, num_frames));

    let mut planner = FftPlanner::<f32>::new();
    let fft = planner.plan_fft_forward(n_fft);

    for frame_idx in 0..num_frames {
        let start = frame_idx * hop_length;

        let mut frame: Vec<Complex<f32>> = vec![Complex::new(0.0, 0.0); n_fft];
        for i in 0..win_length.min(audio.len() - start) {
            frame[i] = Complex::new(audio[start + i] * window[i], 0.0);
        }

        fft.process(&mut frame);

        for k in 0..freq_bins {
            let magnitude = frame[k].norm();
            spectrogram[[k, frame_idx]] = magnitude * magnitude;
        }
    }

    spectrogram
}

fn hz_to_mel(freq: f32) -> f32 {
    2595.0 * (1.0 + freq / 700.0).log10()
}

fn mel_to_hz(mel: f32) -> f32 {
    700.0 * (10.0_f32.powf(mel / 2595.0) - 1.0)
}

fn create_mel_filterbank(n_fft: usize, n_mels: usize, sample_rate: usize) -> Array2<f32> {
    let freq_bins = n_fft / 2 + 1;
    let mut filterbank = Array2::<f32>::zeros((n_mels, freq_bins));

    let min_mel = hz_to_mel(0.0);
    let max_mel = hz_to_mel(sample_rate as f32 / 2.0);

    let mel_points: Vec<f32> = (0..=n_mels + 1)
        .map(|i| mel_to_hz(min_mel + (max_mel - min_mel) * i as f32 / (n_mels + 1) as f32))
        .collect();

    let freq_bin_width = sample_rate as f32 / n_fft as f32;

    for mel_idx in 0..n_mels {
        let left = mel_points[mel_idx];
        let center = mel_points[mel_idx + 1];
        let right = mel_points[mel_idx + 2];

        for freq_idx in 0..freq_bins {
            let freq = freq_idx as f32 * freq_bin_width;

            if freq >= left && freq <= center {
                filterbank[[mel_idx, freq_idx]] = (freq - left) / (center - left);
            } else if freq > center && freq <= right {
                filterbank[[mel_idx, freq_idx]] = (right - freq) / (right - center);
            }
        }
    }

    filterbank
}

/// Extract mel spectrogram features from raw audio samples.
///
/// # Arguments
///
/// * `audio` - Audio samples as f32 values
/// * `sample_rate` - Sample rate in Hz
/// * `channels` - Number of audio channels
/// * `config` - Preprocessor configuration
///
/// # Returns
///
/// 2D array of mel spectrogram features (time_steps x feature_size)
pub fn extract_features_raw(
    mut audio: Vec<f32>,
    sample_rate: u32,
    channels: u16,
    config: &PreprocessorConfig,
) -> Result<Array2<f32>> {
    if sample_rate != config.sampling_rate as u32 {
        return Err(Error::Audio(format!(
            "Audio sample rate {} doesn't match expected {}. Please resample your audio first.",
            sample_rate, config.sampling_rate
        )));
    }

    if channels > 1 {
        let mono: Vec<f32> = audio
            .chunks(channels as usize)
            .map(|chunk| chunk.iter().sum::<f32>() / channels as f32)
            .collect();
        audio = mono;
    }

    audio = apply_preemphasis(&audio, config.preemphasis);

    let spectrogram = stft(&audio, config.n_fft, config.hop_length, config.win_length);

    let mel_filterbank =
        create_mel_filterbank(config.n_fft, config.feature_size, config.sampling_rate);
    let mel_spectrogram = mel_filterbank.dot(&spectrogram);
    let mel_spectrogram = mel_spectrogram.mapv(|x| (x.max(1e-10)).ln());

    let mut mel_spectrogram = mel_spectrogram.t().to_owned();

    // Normalize each feature dimension to mean=0, std=1
    let num_frames = mel_spectrogram.shape()[0];
    let num_features = mel_spectrogram.shape()[1];

    for feat_idx in 0..num_features {
        let mut column = mel_spectrogram.column_mut(feat_idx);
        let mean: f32 = column.iter().sum::<f32>() / num_frames as f32;
        let variance: f32 =
            column.iter().map(|&x| (x - mean).powi(2)).sum::<f32>() / num_frames as f32;
        let std = variance.sqrt().max(1e-10);

        for val in column.iter_mut() {
            *val = (*val - mean) / std;
        }
    }

    Ok(mel_spectrogram)
}